Tel: +27 (0)11 451 – 8500 | Email: sales@bearingcorporation.co.za

Posts tagged with ‘A&S Fersa Bearings’

  • Cage Types And Designs Of Bearings

    By Team BC on 25 April 2018
    0
    26
    This technical file offers a summary of cages for anti-friction bearings which are on FAGs standard production program. It also shows classification of standard cages to their bearing series, rows and sizes. The cage as important part for bearing function as it holds the rolling elements apart in task to avoid their contact holds the rolling elements in equal distances […]
  • ROLLER BEARINGS VS BALL BEARINGS – THE MAJOR DIFFERENCES

    By Team BC on 23 March 2018
    0
    25
      Have you ever wondered what the difference was between roller bearings and ball bearings? At first glance they may not seem all that different. However, these seemingly similar style bearings have very different uses. We’re showing you how bearings work, and what the differences are between these engineering gems. How Bearings Work In general, bearings are all composed of […]
  • Bearing Corporation Going Green

    By Team BC on 12 September 2017
    0
    76
    It’s easy to feel you can’t personally make a difference to help the environment – but you can. Each of us is an integral part of the bigger picture, and through our combined efforts, we can make a difference together! By respecting, protecting and preserving our natural resources, we can ensure that future generations have the same opportunities we have […]
  • Four-Point-Contact Ball Bearing

    By Team BC on 31 August 2017
    0
    55
      four-point-contact ball bearing The four-point-contact ball bearing is a single row angular contact bearings designed to handle two-directional axial loading. These bearings require a minimum amount of space and can be custom designed to meet our customer’s unique loading parameters. And the four-point-contact ball bearings can carry either pure axial loading or combined loading provided the axial component is […]
  • Angular contact bearings

    By Team BC on 31 August 2017
    0
    35
    Angular contact bearings An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So, the angle of contact on the inner race is the same as that on the outer race. Angular contact […]
  • Self-aligning ball bearing

    By Team BC on 31 August 2017
    0
    24
      Self-aligning ball bearing this type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the […]
  • Thrust Bearings

    By Team BC on 25 August 2017
    0
    27
    Thrust bearings have rolling elements which primarily support the axial loads of rotating devices. Several styles of bearings are available in thrust configurations. Whereas radial-load bearings locate ball or roller races on the opposing inner and outer bearing rings, most thrust bearings have raceways machined into the faces of mating rings. This arrangement supports a load that is parallel to […]
  • Bearing shields and seals

    By Team BC on 25 August 2017
    0
    22
        Ball and roller bearings are available with different types of shields and seals. These are commonly referred to as closures. Closures can extend bearing life by preventing contaminants from reaching the critical surfaces inside the bearing, and they help retain the lubricant in the bearing. Different types of closures may be supplied on the same bearing. Special designs […]
  • V-RING SEAL

    By Team BC on 22 August 2017
    0
    23
    V-RING SEAL  The function of a v ring seal, or v ring, is to snap over a rotating shaft and act as a centrifugal seal acting against the bearing face and throwing dirt and contaminants away from the bearing area, which will probably contain the primary sealing elements. V seals are not designed to seal against fluids or pressure differentials in […]
  • The construction of a ball bearing

    By Team BC on 18 August 2017
    0
    16
    Bearings are used to support the rotating components (like shafts) and bear the load which the rotating components carry. Principally, it has four major components: Outer ring: This fit tightly inside the outer structure which is generally not moving e.g. Pump/Motor Casing Inner ring: This ring fits tightly on the shaft and rotates with it. Balls: These are the components […]