Tel: +27 (0)11 451 – 8500 | Email: sales@bearingcorporation.co.za

Posts tagged with ‘Spherical Roller Bearings’

  • WHY FRONT WHEEL BEARINGS FAIL?

    By Team BC on 11 July 2018
    0
    9
    Wheel bearings come in a variety of designs. Many early designs, were made to be serviceable. Today most are either bolt-in or integral in design. Neither requires routine maintenance, but when they fail, learning the reason is important. Symptoms of a bad wheel bearing When a wheel bearing fails, the most common symptom is a roaring noise that increases with […]
  • ROLLER BEARINGS VS BALL BEARINGS – THE MAJOR DIFFERENCES

    By Team BC on 23 March 2018
    0
    25
      Have you ever wondered what the difference was between roller bearings and ball bearings? At first glance they may not seem all that different. However, these seemingly similar style bearings have very different uses. We’re showing you how bearings work, and what the differences are between these engineering gems. How Bearings Work In general, bearings are all composed of […]
  • BEARING CLEARANCE

    By Team BC on 19 February 2018
    0
    30
        BEARING CLEARANCE   Radial Internal Clearance The radial internal clearance of a ball bearing affects life, noise, vibration and heat generation.  It is important to select the appropriate internal clearance for each application. The three types of internal clearance of a ball bearing are radial clearance, axial clearance and moment clearance. Radial internal clearance decreases when a ball […]
  • Bearing Corporation Going Green

    By Team BC on 12 September 2017
    0
    76
    It’s easy to feel you can’t personally make a difference to help the environment – but you can. Each of us is an integral part of the bigger picture, and through our combined efforts, we can make a difference together! By respecting, protecting and preserving our natural resources, we can ensure that future generations have the same opportunities we have […]
  • Angular contact bearings

    By Team BC on 31 August 2017
    0
    35
    Angular contact bearings An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So, the angle of contact on the inner race is the same as that on the outer race. Angular contact […]
  • Self-aligning ball bearing

    By Team BC on 31 August 2017
    0
    24
      Self-aligning ball bearing this type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the […]
  • Thrust Bearings

    By Team BC on 25 August 2017
    0
    27
    Thrust bearings have rolling elements which primarily support the axial loads of rotating devices. Several styles of bearings are available in thrust configurations. Whereas radial-load bearings locate ball or roller races on the opposing inner and outer bearing rings, most thrust bearings have raceways machined into the faces of mating rings. This arrangement supports a load that is parallel to […]
  • Bearing shields and seals

    By Team BC on 25 August 2017
    0
    22
        Ball and roller bearings are available with different types of shields and seals. These are commonly referred to as closures. Closures can extend bearing life by preventing contaminants from reaching the critical surfaces inside the bearing, and they help retain the lubricant in the bearing. Different types of closures may be supplied on the same bearing. Special designs […]
  • V-RING SEAL

    By Team BC on 22 August 2017
    0
    23
    V-RING SEAL  The function of a v ring seal, or v ring, is to snap over a rotating shaft and act as a centrifugal seal acting against the bearing face and throwing dirt and contaminants away from the bearing area, which will probably contain the primary sealing elements. V seals are not designed to seal against fluids or pressure differentials in […]
  • Tips for Bearing Installation

    By Team BC on 11 August 2017
    0
    17
    Bearing installation is as important as bearing design and cleanliness. Improper installation can damage the bearing assembly and can cause brinelling of the bearing, which can result in bearing vibration, noise, and reduced life. listed below are some tips that will help prevent incorrect installation and extend bearing life   Do not remove the bearing from its packaging until you […]