Tel: (+27) 11 451 8500 | Email: sales@bearingcorporation.co.za

Posts tagged with ‘RHP’

  • Bearing load capacity

    By Team BC on 4 August 2017
    0
    24
    There are two load capacity specifications for recirculating linear guides and ball screws—static load capacity and dynamic load capacity. Most engineers are familiar with dynamic load capacity, since this is the value used to calculate bearing life. But it’s also important to consider the component’s static load capacity in order to avoid premature bearing failure. Here’s a quick look at each specification […]
  • How to extend the lifespan and improve the performance of bearings

    By Team BC on 26 July 2017
    0
    35
      First of all, lubrication is very crucial to the lifespan and performance of bearings. You need to select a proper lubrication system and high-quality lubricant. Lubricant oil film will separate the contact oil film surfaces caused by loading and provide proof against corrosion and abrasion. Therefore, lubrication oil film cannot be missing for normal running of all rotating and […]
  • How to Measure and Choose the Correct Bearing Type

    By Team BC on 21 July 2017
    0
    24
    How to Measure and Choose the Correct Bearing Type Reference Numbers The quickest way to determine which bearing you require is using the bearings reference number. Most bearings have their references numbers engraved on the bearings themselves, but these often rub off over time and so it may be necessary to measure the bearing yourself, as described below. Measuring Bearings […]
  • Bearing Friction

    By Team BC on 12 July 2017
    0
    44
    Reducing friction in bearings is often important for efficiency, to reduce wear and to facilitate extended use at high speeds and to avoid overheating and premature failure of the bearing. Essentially, a bearing can reduce friction by virtue of its shape, by its material, or by introducing and containing a fluid between surfaces or by separating the surfaces with an […]
  • Bearing Overheating

    By Team BC on 5 July 2017
    0
    53
    Overheating is a major indicator, along with vibration and noise, of an underlying problem affecting a bearing or related components. Because normal operating temperature varies widely from one application to another, no single temperature is a reliable sign of overheating in every situation. By observing an application when it is running smoothly, a technician can establish a benchmark temperature for […]
  • Bearing / Bearings

    By Team BC on 20 June 2017
    0
    3
    FAG BEARINGS SKF BEARINGS NTN BEARINGS NSK BEARINGS TIMKEN BEARINGS INA BEARINGS OIL SEALS PLUMMER BLOCKS BALL BEARINGS SPHERICAL ROLLER BEARINGS CYLINDRICAL ROLLER BEARINGS TAPERED ROLLER BEARINGS SELF ALIGNING BALL BEARINGS SPINDLE BEARINGS BEARING BEARINGS SOUTH AFRICA BEARING SUPPLIER BEARINGS JOHANNESBURG BEARING SUPPLIERS IN SOUTH AFRICA BEARING SOUTH AFRICA BEARING SUPPLIERS JOHANNESBURG
  • Wheels, Shafts and Axles Rotate in Bearings

    By Team BC on 12 June 2017
    0
    3
      Wheels, Shafts and Axles Rotate in Bearings. The roller became a wheel only when it could be safely positioned by a bearing assembled to the vehicle frame.  The history of the wheel is thus inseparably linked with the history of the bearing. Since there is no model in nature for guiding wheel on axles or axle journals, man faced […]